Fredenslund workshop tools

io.github.afredenslund/fredenslund-workshop-toolsVersion 1.0.10

MFT/3 hole patterns (Shaper-ready SVG) and French cleat wall plans with cut lists. Free, unofficial.

Status

Responds120 msNov 14, 2026, 14:44 UTCAnswered our handshake without sign-in.

Registry data may be out of date

We could not refresh it, so this page shows the last copy.

Last checked: Nov 14, 2026, 14:44 UTC
Latency: 120 ms
Remotes responding: 1 of 1
Sign-in: No sign-in
Hosting: Hosted outside the EU (detected)
Registry data as of: Nov 14, 2026, 22:14 UTC

Data from the official MCP Registry, checked by run.zero. How we check

Connect

Streamable HTTP

https://fredenslund.dk/mcpResponds120 msNov 14, 2026, 14:44 UTC

No sign-in

Claude Code

claude mcp add --transport http fredenslund-workshop-tools https://fredenslund.dk/mcp

Claude Desktop and claude.ai

1
2
3

Settings > Connectors > Add custom connector
Name: fredenslund-workshop-tools
Remote MCP server URL: https://fredenslund.dk/mcp

Cursor

{
  "mcpServers": {
    "fredenslund-workshop-tools": {
      "url": "https://fredenslund.dk/mcp"
    }
  }
}

VS Code

code --add-mcp '{"name":"fredenslund-workshop-tools","type":"http","url":"https://fredenslund.dk/mcp"}'

Built your own server? run.zero hosts MCP servers on European infrastructure.

Host your own MCP server on run.zero

Tools

2 tools

Tools of Fredenslund workshop tools
	Description		Read-only	Idempotent	Open world
`french_cleat_plan`Plan a French cleat wall for a workshop with the Fredenslund cleat system: 90 mm cleat boards and 90 mm gaps (180 mm pitch), hook plate 72 mm including 12 mm material, 30 mm buffer between hangers, a 900 mm table that hangs on its own cleat one hook lower (cleat top 840) with the rows following that cleat, top cleat at least one gap below the ceiling, lowest cleat at least 210 mm above the floor (its underside; rows 300 … 2280 on the default wall). A hanger comes off by lifting it the material + 3 mm, so the hook plate is at most the gap − 3 and the top cleat at least the hook plate + 3 below the ceiling. The default wall is a full plywood sheet, 1220 × 2440 mm. Give the wall size and the hangers to hang (hooks, shelves, boxes, panels: left edge, the cleat row it hangs on, width, extra rows spanned below — a shelf usually spans one row). Returns the cleat rows (cleat top heights from the floor), every hanger with its panel height and whether it fits — and why not (row missing, row off, outside wall, collision) — the cut list with cleat metres, wall coverage, a picture of the wall (a link to a 1200 × 630 PNG) and a link that opens the same plan editable in the tool. All values in mm. Call with no hangers to get the rows for a wall first. Beta.	Plan a French cleat wall for a workshop with the Fredenslund cleat system: 90 mm cleat boards and 90 mm gaps (180 mm pitch), hook plate 72 mm including 12 mm material, 30 mm buffer between hangers, a 900 mm table that hangs on its own cleat one hook lower (cleat top 840) with the rows following that cleat, top cleat at least one gap below the ceiling, lowest cleat at least 210 mm above the floor (its underside; rows 300 … 2280 on the default wall). A hanger comes off by lifting it the material + 3 mm, so the hook plate is at most the gap − 3 and the top cleat at least the hook plate + 3 below the ceiling. The default wall is a full plywood sheet, 1220 × 2440 mm. Give the wall size and the hangers to hang (hooks, shelves, boxes, panels: left edge, the cleat row it hangs on, width, extra rows spanned below — a shelf usually spans one row). Returns the cleat rows (cleat top heights from the floor), every hanger with its panel height and whether it fits — and why not (row missing, row off, outside wall, collision) — the cut list with cleat metres, wall coverage, a picture of the wall (a link to a 1200 × 630 PNG) and a link that opens the same plan editable in the tool. All values in mm. Call with no hangers to get the rows for a wall first. Beta.	No	Yes	Yes	No
`mft3_hole_pattern`Festool MFT/3 dog-hole pattern for a table top of any size. The requested width and depth snap to the nearest valid MFT/3 size (46 + 96 × n mm, n = 1–20, i.e. 142–1966 mm): Ø20 mm holes on a 96 mm grid with the first hole centred 71 mm from every edge, plus the four corner screw holes (Ø11 through, Ø15 counterbore). Returns the snapped size, hole count, every hole and screw-hole position, the Shaper export depths, the file name, a link to the true-to-scale SVG for Shaper Origin/Studio, a picture of the top (a link to a 1200 × 630 PNG) and a link that opens the size in the tool. When you present the result, link the SVG file (it is what the person cuts from), the picture and the tool. The original MFT/3 top is 1102 × 718 mm (11 × 7 holes). Unofficial hobby tool, not affiliated with Festool or Shaper.	Festool MFT/3 dog-hole pattern for a table top of any size. The requested width and depth snap to the nearest valid MFT/3 size (46 + 96 × n mm, n = 1–20, i.e. 142–1966 mm): Ø20 mm holes on a 96 mm grid with the first hole centred 71 mm from every edge, plus the four corner screw holes (Ø11 through, Ø15 counterbore). Returns the snapped size, hole count, every hole and screw-hole position, the Shaper export depths, the file name, a link to the true-to-scale SVG for Shaper Origin/Studio, a picture of the top (a link to a 1200 × 630 PNG) and a link that opens the size in the tool. When you present the result, link the SVG file (it is what the person cuts from), the picture and the tool. The original MFT/3 top is 1102 × 718 mm (11 × 7 holes). Unofficial hobby tool, not affiliated with Festool or Shaper.	No	Yes	Yes	No

Details

Registry status: Active
Published: Sep 27, 2026
Updated: Sep 27, 2026
Website: https://fredenslund.dk/mcp⁠ (opens in a new tab)
Repository: Not given
Categories (suggested): Design and mediaSuggested categories are assigned automatically from the registry text and may be wrong. Verified operators can correct them.
GDPR: Not declared

Are you the operator? Claim this listing